NA-LUBE AW-6509 is an ashless, multifunctional additive that provides excellent antiwear and EP properties to mineral oil and most synthetic lubricants. NA-LUBE AW-6509 is especially suited for formulating ashless lubricants that require high temperature performance. NA-LUBE AW-6509 has better antiwear and frictional properties than a secondary ZnDTP and is not aggressive toward copper.
It is HX-1 compliant with FDA 21 CFR not to exceed 0.5% by weight (NSF Reg No. 149707).
| Viscosity @ 40°C | Crystalline |
| Phosphorus Content | 8.90% |
| Sulfur Content | 9.30% |
| Application Advantage | EP/AW properties, FDA 21 CFR HX-1, Low coefficient of friction, Multifunctional |
| Formulation Advantage | Ashless |
| Market Application | Gear, Grease, Hydraulic |
| Product Group | Antiwear |
Related Products
-
NA-LUBE AW-6400FG
Viscosity @ 40°C 1400 cStPhosphorus Content 7.20%Nitrogen Content 2.40%AntiwearNSF HX-1 approved ashless, multifunctional rust inhibitor and antiwear additive. -
NA-LUBE AW-6330
Viscosity @ 40°C 20 cStPhosphorus Content 5.10%Sulfur Content 10%AntioxidantMultifunctional additive with excellent extreme pressure, antiwear and antioxidation properties that can be used as an ashless alternative to ZDDP. -
NA-LUBE AW-6110
Viscosity @ 40°C 448 cStPhosphorus Content 8.20%Nitrogen Content 1.80%AntiwearAmine phosphate with excellent antiwear properties and rust protection suited for lubricants that require high load carrying capacity.
Recently Viewed Products
-
K-PURE CDI-4308
Chemistry Organo phosphateApplication Advantage Corrosion resistanceFormulation Advantage CompatibilityCorrosion inhibitorCorrosion inhibitor for water, solvent, or solventless systems. -
K-CORR NF-200
Sulfur Content 0%Nitrogen Content 14.50%Viscosity @ 40°C 78 cStYellow metal deactivatorAshless yellow metal deactivator. HX-1 compliant with FDA 21 CFR. -
K-POL 8211
Viscosity @ 25°C 7,200 cPsHydroxyl Number 400Equivalent Weight, g/eq. (as supplied) 140Polyester diolCost effective diol. Improves hardness and flexibility. Good exterior durability and chemical resistance. Recommended for 2K PU general purpose coatings and elastomers.