Showing 31–45 of 51 results
Filter-
K-FLEX A308
Viscosity @ 25°C 1,500 cPsHydroxyl Number 260Equivalent Weight, g/eq. (as supplied) 216Polyester diolLow viscosity, providing good hardness and adhesion while lowering VOCs. Recommended for acrylic/isocyanate and acrylic/melamine systems. -
K-FLEX UD-320-100
Viscosity @ 50°C 7,000 cPsHydroxyl Number 350% Active 100Urethane diolRecommended for prepolymer synthesis and 100% solids WB/SB melamine crosslinked systems or 2K PU. Used for preparation of polyester polyurethanes or alkyd polyurethanes. Provides hardness and exterior durability -
K-FLEX UD-350W
Viscosity @ 25°C 4,000 cPs% Active 88Hydroxyl Number 300Urethane diolHigh solids, low viscosity aqueous urethane diol resin that increases hardness and provides improved resistance properties in WB/WR 2-component polyurethane -
K-FLEX XM-3018
Company Division CoatingsMarket Application 2K PUApplication Advantage Ambient curePolyester diolHydrolytically stable, water-reducible polyester polyol resin modifier that enhances durability, appearance, and performance. -
K-FLEX XM-332
Viscosity @ 25°C 400 cPsHydroxyl Number 265Equivalent Weight, g/eq. (as supplied) 212Polyester diolLowest viscosity polyester diol that produces the softest films. Provides abrasion resistance, scratch resistance and good weatherability. -
K-FLEX XM-359
Viscosity @ 25°C 9,800 cPsHydroxyl Number 230Equivalent Weight, g/eq. (as supplied) 244Polyester diolLonger pot life version of K-FLEX 188. Improves flexibility while maintaining hardness. Also improves salt spray, humidity resistance and exterior durability. Highly recommended for 2k PU. -
K-FLEX XM-B301
Viscosity @ 25°C 1,100 cPsHydroxyl Number 190Application Advantage AdhesionAcetoacetate reactive diluentPrimarily recommended for use in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates. -
K-POL 8211
Viscosity @ 25°C 7,200 cPsHydroxyl Number 400Equivalent Weight, g/eq. (as supplied) 140Polyester diolCost effective diol. Improves hardness and flexibility. Good exterior durability and chemical resistance. Recommended for 2K PU general purpose coatings and elastomers. -
NACORR 1754
Metal Type Amine% Active 35Solvent 2-Butoxyethanol/n-Butyl AlcoholCorrosion inhibitorLiquid corrosion inhibitor with excellent compatibility in water based systems, emulsions and dispersion. -
NACURE 2558
% Active 25Formulation Advantage BlockedApplication Advantage Reduced wrinklingCatalyst (acid)Effective in controlling wrinkling, popping and blistering in HS systems. -
NACURE 3525
% Active 25Formulation Advantage BlockedApplication Advantage Corrosion resistanceCatalyst (acid)Better solubility than X49-110 and slower curing. Good salt spray resistance and adhesion. -
NACURE 4054
% Active 50Formulation Advantage Package stabilityApplication Advantage AdhesionCatalyst (acid)Excellent adhesion. Siloxane crosslinking. -
NACURE 4167
% Active 25Formulation Advantage BlockedApplication Advantage Water resistanceCatalyst (acid)Blocked phosphate for high NH/polymeric melamines. Siloxane crosslinking. -
NACURE 5076
% Active 70Formulation Advantage SolubilityApplication Advantage Exterior durabilityCatalyst (acid)Complies with FDA 21 CFR, Sec. 175.300 (b) (3) xii & xiii (a&b). -
NACURE 5225
% Active 25Formulation Advantage BlockedApplication Advantage Exterior durabilityCatalyst (acid)Best solubility in high solids enamels. Good solubility in aromatic solvents.