Showing 61–75 of 231 results
Filter-
K-CORR G-1340
Zinc Content 13.10%Phosphorus Content 1.10%Viscosity @ 40°C 12878 cStRust inhibitorHighly effective rust inhibitor developed for specialty grease applications as a replacement for zinc naphthenate. Medium viscosity. -
K-CORR G-1350
Zinc Content 8.70%Phosphorus Content N/AViscosity @ 40°C Very viscousRust inhibitorCost effective rust inhibitor developed for specialty grease applications as a replacement for zinc naphthenate. High viscosity. -
K-CORR G-1360
Zinc Content 8.60%Phosphorus Content 1.10%Viscosity @ 40°C 815 cStRust inhibitorHighly effective and easy to handle rust inhibitor developed for specialty grease applications as a replacement for zinc naphthenate. Low viscosity. -
K-CORR G-1370
Zinc Content 13.50%Phosphorus Content 1.10%Viscosity @ 40°C 7727 cStRust inhibitorHighly effective and easy to handle rust inhibitor developed for specialty grease applications as a replacement for zinc naphthenate. Excellent antiwear. High viscosity. -
K-CORR NF-200
Sulfur Content 0%Nitrogen Content 14.50%Viscosity @ 40°C 78 cStYellow metal deactivatorAshless yellow metal deactivator. HX-1 compliant with FDA 21 CFR. -
K-CORR NF-410
Sulfur Content 36.50%Nitrogen Content 6.50%Viscosity @ 40°C 500 cStYellow metal deactivatorAshless multifunctional additive providing extreme pressure and yellow metal protection. -
K-CORR SA-300
Mineral Oil Content ~25%Acid Value 180 mg KOH/gViscosity @ 40°C 3194 cStRust inhibitorAshless rust inhibitor for industrial and automotive lubricants, greases and rust preventive fluids. -
K-CURE 1040
% Active 40Formulation Advantage UnblockedApplication Advantage Exterior durabilityCatalyst (acid)Highest Gloss. Fast Cure. Excellent weathering and exterior durability. -
K-CURE 1040W
% Active 40Formulation Advantage Easy incorporation into waterborneApplication Advantage Exterior durabilityCatalyst (acid)High quality p-TSA catalyst that is dissolved in water. -
K-FLEX 148
Viscosity @ 25°C 3,750 cPsHydroxyl Number 235Equivalent Weight, g/eq. (as supplied) 238Polyester diolLower viscosity version of K-FLEX 188. Improves flexibility and gloss. Good flow and leveling. Excellent intercoat adhesion. Recommended for primers. -
K-FLEX 171-90
Viscosity @ 25°C 3,700 cPsHydroxyl Number 122Equivalent Weight, g/eq. (as supplied) 432Polyester diolChain extended version of K-FLEX 188 with improved adhesion and flexibility. Low crosslinker demand. -
K-FLEX 188
Viscosity @ 25°C 10,000 cPsHydroxyl Number 230Equivalent Weight, g/eq. (as supplied) 244Polyester diolMost versatile polyester diol. Improves flexibility while maintaining hardness. Also improves salt spray, humidity resistance and exterior durability. Highly recommended for 2k PU. -
K-FLEX A307
Viscosity @ 25°C 5,400 cPsHydroxyl Number 140Equivalent Weight, g/eq. (as supplied) 400Polyester diolLow viscosity, 100% solids. Improves flexibility. Low crosslinker demand. Recommended for isocyanate and aminoplast systems. -
K-FLEX A308
Viscosity @ 25°C 1,500 cPsHydroxyl Number 260Equivalent Weight, g/eq. (as supplied) 216Polyester diolLow viscosity, providing good hardness and adhesion while lowering VOCs. Recommended for acrylic/isocyanate and acrylic/melamine systems. -
K-FLEX UD-320
Viscosity @ 25°C 7,000 cPsHydroxyl Number 300% Active 82Urethane diolIncorporation of urethane into HMMM type systems without use of NCO. Increases application solids and hardness. Improves chemical resistance, exterior durability and hydrolytic stability.