Showing 91–105 of 231 results
Filter-
K-KAT XK-614
Metal Type Zinc-amine complex% Active 100Market Application 1K blocked NCOCatalyst (tin-free)Recommended for ambient cure and force dry 2K SB and WB PU coatings. Has excellent stability in HFO-Blown PU foams. Can also be used in 1K moisture cure PU adhesives and coatings. -
K-KAT XK-618
Metal Type Mixed carboxylate% Active 2.1Market Application 2K PUCatalyst (tin-free)Alternative to mercury and tin catalysts in urethane cast elastomers. Excellent compatibility with 1,4-BDO and recommended in aliphatic systems. -
K-KAT XK-635
Metal Type Zinc complexMarket Application 1K blocked NCOApplication Advantage Back end cureCatalyst (tin-free)Balance of cure and performance advantages. Effective for ambient and force dry cure of 2K PU. Excellent performance with MEKO-blocked Isocyanates. -
K-KAT XK-648
Metal Type Zinc complexMarket Application PolysiloxaneApplication Advantage Hydrolytic stabilityCatalyst (tin-free)Recommended for catalysis of silane terminated polymers, especially pigmented adhesives and coatings. Also effective for polyurea coatings with aromatic diamine curatives. -
K-KAT XK-651
Metal Type Bismuth carboxylateMarket Application 2K PU% Active 25Catalyst (tin-free)High active, versatile, designed for 2K PU, HFO blown foam and silane terminated coatings. Improved hydrolytic stability compared to traditional Bi carboxylates. -
K-KAT XK-661
Metal Type Zinc complex% Active 80Market Application 1K moisture cure PUCatalyst (tin-free)Excellent hydrolytic stability. Recommended for 2K PU coatings and 1K moisture cure PU adhesives. -
K-KAT XK-672
Metal Type Mixed carboxylateMarket Application 1K blocked NCOApplication Advantage FDA approvableCatalyst (tin-free)Effective catalyst for production of urethanes. Meets requirements of FDA 21 CFR 175.300. Recommended for 1K blocked NCO PU systems for coil coatings. -
K-POL 8211
Viscosity @ 25°C 7,200 cPsHydroxyl Number 400Equivalent Weight, g/eq. (as supplied) 140Polyester diolCost effective diol. Improves hardness and flexibility. Good exterior durability and chemical resistance. Recommended for 2K PU general purpose coatings and elastomers. -
K-POL XM-413
% Active 100Viscosity @ 25°C 850 cPsApplication Advantage Pot lifeUrethane diolConsists of only 1° OH. Good compatibility in high mW ethers, esters and aromatic isocyanates. Recommended as a chain extender and curative for aliphatic prepolymers. A 1,4-Butanediol alternative with longer pot-life and lower exotherm for reduced suck-back and shrinkage. -
K-PURE CDI-4303
Chemistry Amino acid derivativeFormulation Advantage CompatibilityApplication Advantage Corrosion resistanceCorrosion inhibitorCorrosion inhibitor for solvent and solventless systems. -
K-PURE CDI-4308
Chemistry Organo phosphateApplication Advantage Corrosion resistanceFormulation Advantage CompatibilityCorrosion inhibitorCorrosion inhibitor for water, solvent, or solventless systems. -
K-PURE CDI-4311
Chemistry Organo phosphateApplication Advantage Corrosion resistanceMarket Application AdhesivesCorrosion inhibitorCorrosion inhibitor for water, solvent, or solventless systems. -
K-PURE CDR-3315
Chemistry Ester diolApplication Advantage Adhesion promotionFormulation Advantage Low VOCResin modifierModifier for aminoplast, isocyanate and cationically cured epoxies. -
K-PURE CXC-1612
Chemistry Quarternary ammonium blocked super acid catalystMarket Application AdhesivesApplication Advantage Low temperature cureCatalyst (acid)An super acid based catalyst for epoxy homopolymerization and copolymerization with alcohol, vinyl ether ad oxetane. -
K-PURE CXC-1614
Chemistry Quarternary ammonium blocked super acid catalystMarket Application AdhesivesApplication Advantage Fast cure responseCatalyst (acid)A blocked acid catalyst based on a super acid.